background image

 

8.

 If the distribution and/or use of the Program are restricted in certain countries 

either by patents or by copyrighted interfaces, the original copyright holder who 
places the Program under this License may add an explicit geographical 
distribution limitation excluding those countries, so that distribution is permitted 
only in or among countries not thus excluded.  In such case, this License 
incorporates the limitation as if written in the body of this License. 
 

9.

 The Free Software Foundation may publish revised and/or new versions of the 

General Public License from time to time.  Such new versions will be similar in 
spirit to the present version, but may differ in detail to address new problems or 
concerns.  
Each version is given a distinguishing version number.  If the Program specifies a 
version number of this License which applies to it and "any later version", you 
have the option of following the terms and conditions either of that version or of 
any later version published by the Free Software Foundation.  If the Program does 
not specify a version number of this License, you may choose any version ever 
published by the Free Software Foundation. 
 

10.

 If you wish to incorporate parts of the Program into other free programs 

whose distribution conditions are different, write to the author to ask for 
permission.  For software which is copyrighted by the Free Software Foundation, 
write to the Free Software Foundation; we sometimes make exceptions for this.  
Our decision will be guided by the two goals of preserving the free status of all 
derivatives of our free software and of promoting the sharing and reuse of 
software generally. 
 

NO WARRANTY

 

 

11.

 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO 

WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS 
AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY 
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED 
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND 
PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE PROGRAM PROVE 
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR 

 - 

162 

Summary of Contents for TS-101 Turbo Station




































































































































































Reviews: