LED
Status
Description
M.2 Drive
Flashes red
The data is being accessed and a read/write error occurs
during the process.
Red
A drive read/write error occurred.
Flashes green
Data is being accessed.
Green
The drive is ready.
Off
No drive was detected.
M.2 Drive Status Green
The drive is ready.
Red
A drive read/write error occurred.
Flashes red 5 times per
second
The drive is being located in the operating system.
Off
No drive was detected.
2.5 Gigabit
Speed LAN
Green
The network connection is operating at 2.5 Gbps.
Orange
The network connection is operating at 1 Gbps.
Off
• The network connection is operating at 100 Mbps.
• There is no network connection.
2.5 Gigabit
Activity LAN
Orange
A network connection has been established.
Flashes orange
The device is being accessed from the network.
Off
There is no network connection.
USB One Touch
Copy
Flashes blue every 0.5
seconds
• A USB device connected to the front USB port is
detected.
• A USB device connected to the front USB port is being
removed from the device.
• A USB device connected to the front USB port is being
accessed.
Blue
A USB device is detected in the front USB port.
Off
No USB device is detected.
Audio Alert
Duration
Frequency
Description
Short beep (0.5 seconds) 1
• The NAS is starting up.
• The NAS is shutting down.
• The NAS is being reset (reset button).
Short beep (0.5 seconds) 3
• The user tried to copy the NAS data to the
external storage device from the front USB port,
but the data cannot be copied.
• The NAS has completed a firmware update.
TS-hx86 User Guide
Basic Operations
54
