• For security purposes, the myQNAPCloud Link remote connection service will be disabled
on your NAS after initialization. You can enable it by connecting to QuTS hero through LAN
and then installing myQNAPCloud Link.
7.
Click
Next
.
The
Smart Installation Guide
opens in the default web browser.
8.
Perform any of the following actions.
• To check for the latest available version, click
Start
.
The wizard downloads the latest available version, and then the NAS restarts after the download
is complete. If a newer version is not available, the wizard automatically displays the
Smart
Installation Guide
.
• To install the out-of-the-box version, click
Skip
.
9.
Click
Start Smart Installation Guide
.
The
Install Firmware
window appears.
10.
Install firmware using any of the following methods:
Installation methods
Steps
Automatic
a.
Click
Start
.
Automatically searches for available firmware
updates and installs firmware.
Manual installation
a.
Click
Manual Installation
.
The
Install Firmware
window appears.
b.
Click
Browser
.
The upload file window appears.
c.
Select file.
d.
Click
Open
.
Starts firmware installation.
Skip
a.
Click
Skip
.
Skips firmware installation.
11.
Specify the following information
•
NAS name
: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
•
Password
: Specify an administrator password with 1 to 64 characters. The password supports all
ASCII characters.
12.
Click
Next
.
13.
Specify the time zone, date, and time.
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
14.
Click
Next
.
The
Configure the network settings
screen appears.
15.
Select
Obtain an IP address automatically (DHCP)
.
TS-hx86 User Guide
Installation and Configuration
46
