111
-
Starting Service: Starting NAS system services (no actions need to be performed).
Note that applications start only after the system finishes booting.
For TVS-x82 Series, the LCD panel displays additional booting informationafter you power
on the NAS:
B I O S X X X X X X X
C h e c k i n g M e m o r y
-
BIOS xxxxx – xxxx is the BIOS version, whichcan be used for technical support to
help identify and resolve issues.
-
Startupphases:
o
Checking Memory – The system checksthe installed memory.
o
Powering up all disks – Power up all disks sequentially.
o
Hardware initialization – Initialize additional hardware components, such as PCIe
SSD, Graphic card, Thunderbolt adapter, etc.
o
Booting - Boot from the DOM. If the startupstops at this step, the DOM may be
defective. Please seek technical support.
o
Starting System – Starting QTS. If the startup stops at this step, the QTS
installation may have encountered problems. Please seek technical support.
The remaining startup phases are the same as those of other NAS models.
