4.
Verify that the expansion units are recognized by the NAS.
a.
Log on to QuTS hero as administrator.
b.
Go to
Main Menu
>
Storage & Snapshots
>
Overview
>
Storage
>
System
.
c.
Verify that the expansion units are listed.
Connecting SATA Expansion Units
1.
Power off the NAS.
2.
Install a host bus adapter on the PCIe slot.
Note
The QNAP QXP host bus adapter is required for connecting the SATA JBOD enclosure to a
host device. Third-party host bus adapters are not compatible with QNAP JBOD enclosures.
For details, see
3.
Connect the expansion units to the NAS using the following topology.
4.
Power on the SATA JBOD expansion units.
5.
Power on the NAS.
6.
Verify that the expansion units are recognized by the NAS.
a.
Log on to QuTS hero as administrator.
GM-1000 User Guide
Installation and Configuration
41
