manualshive.com logo in svg

QNAP GM-1000, User Manual

Share
Download
QNAP GM-1000 User Manual Download Page 12

LED

Status

Description

System status

Flashes green and red alternately
every 0.5 seconds

• The drive is being formatted.

• The device is being initialized.

• The operating system is being

updated.

• RAID rebuilding is in progress.

• Online RAID Capacity

Expansion is in progress.

• Online RAID Level Migration is

in progress.

Green

The device is ready.

Flashes green every 0.5 seconds

• The device is not configured.

• The drive is not formatted.

Red

• The drive is invalid.

• The disk volume has reached

its full capacity.

• The disk volume is about to

reach its full capacity.

• The system fan is not

functioning.

• An error occurred when

accessing (read/write) the
data.

• A bad sector is detected on

the hard drive.

• The device is in degraded

read-only mode (two member
drives failed in RAID 5 or
RAID 6 but the data can still
be read).

• A hardware self-test error

occurred.

Flashes red every 0.5 seconds

The device is in degraded mode
(one member drive failed in RAID
1, RAID 5, or RAID 6).

Off

• The device is powered off.

• All drives are in standby

mode.

Front Panel OLED Display

The OLED display shows the status of the nodes and main components.

GM-1000 User Guide

Product Overview   

11

Summary of Contents for GM-1000






















































Reviews:

No comments

Brands by name

Popular brands

Load more brands