QMS Magicolor Magicolor, User Manual

Page: 154 / 446

optional CCITT emulation, this value should be increased by 50
KB.
Administration/Memory/K Mem Emul Tmp
This is the amount of RAM (KB) to be used by non-PostScript
emulations for storing downloaded fonts. The size range and
default varies depending upon the amount of RAM available on
your system.
Administration/Memory/K Mem Display
This is the amount of RAM (KB) dedicated to the display lists. The
display list client holds the intermediate representation of pages to
be printed in compressed blocks of data. The size range and default
varies depending upon the amount of RAM available on your
system.
Administration/Memory/K Mem Framebuff
This is the amount of system RAM (KB) dedicated to the frame
buffers. This client holds rasterized pages that are ready to be
transferred to the print engine. The amount of frame buffer storage
affects the maximum size of any single page. The size range and
default varies depending upon the amount of RAM available on
your system. For example, the factory default setting for a printer
with 12 MB of RAM is the amount of memory necessary to print
a four-color letter- or A4-size page in 300 dpi resolution. The
factory default setting for a printer with 24 MB of RAM is the
amount necessary to print a four-color letter- or A4-size page in
600 dpi resolution. The factory default setting for a printer with 28
MB of RAM is the amount necessary to print a four-color legal-size
page in 600 dpi resolution.
Administration/Memory/K Mem Disk Cache
This is the amount of RAM (KB) dedicated to the disk cache, the
area in which frequently used data is stored so it does not have to
be continually read from and written to a hard disk (either the
Chapter 4
4 - 4 4 P r i n t e r C o n f i g u r a t i o n