QMS Magicolor Magicolor, User Manual

Page: 103 / 446

the PC serial settings, use the printer control panel as described
below:
1. Press the printer control panel Online/Offline key to make the
Online LED go out.
2. Press the Menu key to enter the top-level menu, then press the
Next key until the message window displays
OPERATOR CONTROL
ADMINISTRATION
3. Press the Select key to enter the Administration menu, then
press the Next key until the message window displays
ADMINISTRATION
COMMUNICATIONS
4. Press the Select key to enter the Communications menu, then
press the Next key until the message window displays
COMMUNICATIONS
SERIAL
5. Press the Select key to enter the Serial menu, then press the
Next key until the message window displays
SERIAL
BAUD RATE
6. Press the Select key to enter the Baud Rate menu. The message
window displays the currently selected baud rate (* represents
a default setting):
*9600 BAUD
7. Press the Next key until the correct baud rate is displayed.
NOTE: Baud rates of 19200 and 38400 require that either RTS
or CTS hardware flow control (Hdwe Flow Ctl) be
Chapter 3
C o n n e c t i n g t h e P r i n t e r 3 - 1 9