QMS Crownnet, Setup Manual

Page: 20 / 86

Software
Installation
QMS CrownNet Setup Guide 18
7 Change to the location where you want the CrownAdmin 3
directory to be created.
» Note: The directory in which the crnadm file resides must be able
to be mounted by all network nodes that need to access the
printer.
8 Extract the files from the CD-ROM:
For example:
tar xvf /cdrom/plaform/unix/crnadm/aix/
aix.tar
↵
This creates a crnadm directory containing CrownAdmin 3.
» Note: See the main readme file on the CD-ROM for the exact
location of this file.
9 Unmount the CD-ROM file system:
umount device_filename
↵
For device_filename , substitute the complete pathname of the
device file associated with the CD-ROM drive.
10 Add the name of the directory containing crnadm (the direc-
tory in which you extracted the aix.tar file) to your path.
11 Install the UNIX Host Software, following the instructions in
“Installing the UNIX Host Software” on page 30.
Installing CrownAdmin for DOS
CrownAdmin for DOS is a software utility that allows you to monitor
and configure QMS printers and perform network operations on print-
ers connected to your network..
1 Insert the CD-ROM in the CD-ROM drive.
2 At the DOS C> prompt, type the full path of the install pro-
gram.
For example
x:\platform\dos\crnadm\install source destination
↵