Software
Installation
QMS CrownNet Setup Guide
30
Installing the UNIX Host Software
1
Insert the CD-ROM in your CD-ROM drive.
»
Note:
Some drives require that the disk be placed in a caddy
before being inserted in the drive. Check your CD-ROM drive
documentation for information. Also, it takes a few seconds for
the automounter to detect the CD.
2
Log on the UNIX system as root.
3
Type the following command to go to the root directory:
cd /
↵
4
If you’re using a Solaris system, skip to step 6.
If you’re using a SunOS system and already have a directory on
the system named cdrom, skip to step 5.
If you’re using a SunOS system and don't have a directory on the
system named cdrom, type the following command to make one:
mkdir /cdrom
↵
5
Mount the CD-ROM file system:
mount -r -t hsfs device_filename /cdrom
↵
For device_filename substitute the complete pathname of the
device associated with the CD-ROM drive. On SunOS systems,
device_filename is usually /dev/sr0. If it isn't, check your SunOS
system documentation.
6
Verify that the CD-ROM file system has been mounted by
listing the contents of the directory:
The directory contains several subdirectories, including unix.
7
Change to the directory in which you want the UNIX Host
Software to be installed.
8
Extract the files from the CD-ROM.
For example:
tar xvf /cdrom/platform/unix/host_sw/hs_tar
↵
Summary of Contents for Crownnet
Page 1: ...QMS CrownNet Setup Guide 1800329 001H ...
Page 6: ......