QMS Crownnet, Setup Manual

Page: 38 / 86

Interface
Configuration
QMS CrownNet Setup Guide 36
4 In the Administration/Communications/ xxxxxxxx NIC/Crown-
Net/NetWare/RN Printer#1/PServer Name[1], PServer
Name[2], and PServer Name[3] menus (where
xxxxxxxx is
either Resident or Optional), enter the name of the print
server.
» Note: The three PServer Name[x] menus allow you to identify 1
print server with a name up to 47 characters long. (Up to 16
characters can be entered in the first two menus and 15 in the
third menu). You cannot use these 3 menus to identify 3 print
servers.
Spaces and lowercase characters are not allowed. However,
underscore characters (_) are allowed to simulate multiword
names (for example, PUBS_PSERVER). At the printer control
panel only, a space must be used following the last character of
the print server name to end the name. For example, the print
server name
FIRSTGROUP_GROUPS_RED_TEAM_TEAMS_CRC_QMS
is 42 characters long, and must be entered as follows:
PSERVERName[1]
FIRST_GROUP_GROU
PSERVER Name[2]
PS_RED_TEAM_TEAM
PSERVER Name[3]
S_CRC_QMS<space>
where <space> is the space character.
5 Reset the CrownNet interface by using the Administration/
Communications/
xxxxxxxx NIC/CrownNet/Common/Soft
Reset menu (where xxxxxxxx is either Resident or Optional).
6 Skip to “Network Configuration” on page 39.