QMS 2425, Operation Manual

Page: 99 / 186

0HGLD-DPV
7URXEOHVKRRWLQJ3ULQWHU3UREOHPV
$XWRPDWLF-DP5HFRYHU\
With most printers, if a jam occurs, you must remove the jammed
media and then reprint the job. However, the QMS 2425/2425
TURBO Print System provides automatic jam recovery (when
enabled through the Administration/Engine/Page Recovery menu). If
a media jam occurs, remove the jammed media, and printing auto-
matically resumes from the page the printer stopped at when the jam
occurred.
▲
Caution: For automatic jam recovery to work, it is necessary to leave
the printer turned on when you remove the jammed media. After the
jam is cleared, open and close one of the doors (top, left, or right)
before printing. Printing will not resume until you do this.
/RFDWLQJ0HGLD-DPV
When a media jam occurs, a
PAPER JAM
message displays in the
message window. Frequent jams in any area indicate that area should
be checked, repaired, or cleaned. Repeated jams may also happen if
you are using the wrong weight print media. (See the “Print Media”
section of appendix B, “Technical Specifications,” in the
Reference,
for print media specifications.)