Install a Network
Print Monitor
QMS 2060 WX Print System Setup Guide
34
c
Select Cancel to cancel adding the port and to exit from the
Add QMS Port dialog box.
10 Choose OK.
11 Choose Close in Printer Ports dialog box, then choose OK in
Print Server Properties to close the Printers dialog box.
Configure a QMS Port
After a QMS port has been added, its settings must be configured.
The following procedure describes how to configure a QMS port.
1
From the Start menu, choose Settings.
2
Choose Printers.
3
In the Printers window click the right mouse button.
4
In the Print Servers Properties dialog box select the Ports tab.
5
Select QMS Port from the list then choose the Configure Port
button.
6
Configure the Timers.
The following timeouts are used by the QMS Network Print Moni-
tor when transporting print jobs to the print device and reporting
their print status to Print Manager:
a
Status update interval
Determines how often the QMS Network Print Monitor updates
Print Manager with status information on the print device
attached to the port. Scroll through the list box and select a
value between 1 and 600 seconds. The default is 5 seconds.
b
Status request timeout
Sets the amount of time that the QMS Network Print Monitor
waits for a response from the print device before notifying
Print Manager that the device is not responding. Scroll
through the list box and select a value between 1 and 600
seconds. The default is 10 seconds.
