Install a Network
Print Monitor
QMS 2060 WX Print System Setup Guide
28
7
Configure the Timers.
The following timeouts are used by the QMS Network Print Moni-
tor when transporting print jobs to the print device and reporting
their print status to Print Manager:
a
Status update interval
Determines how often the QMS Network Print Monitor
updates Print Manager with status information on the print
device attached to the port. Scroll through the list box and
select a value between 1 and 600 seconds. The default is 5
seconds.
b
Status request timeout
Sets the amount of time that the QMS Network Print Monitor
waits for a response from the print device before notifying
Print Manager that the device is not responding. Scroll
through the list box and select a value between 1 and 600
seconds. The default is 10 seconds.
c
Send request timeout
Sets the amount of time that the QMS Network Print Monitor
waits for a print job to be sent before it returns control to the
Microsoft Windows 95 Print Spooler. Scroll through the list
box and select a value between 1 and 600 minutes. The
default is 60 minutes.
If this timeout
expires and the job
was sent via a...
This is what happens...
Windows 95 Server
The print job is automatically terminated
and cleared from the system.
Workstation
The Windows 95 Print Spooler dialog box
displays, asking for a retry or cancel
response.
» Note:
Regardless of your response, the
job is terminated and cleared from the
system.
