QMS 1800428-001B, Reference Manual

Page: 170 / 202

Notices
QMS magicolor CX Reference Guide 3-36
▲
Caution:
Any modifications or changes to this product not expressly
approved in writing by the manufacturer responsible for compliance to
Federal Regulations could void the user's authority to operate this
product within the Laws and Regulations of the Federal
Communications Commission.
Laser Safety
This printer is certified as a Class 1 laser product under the U.S.
Department of Health and Human Services (DHHS) Radiation Perfor-
mance Standard according to the Radiation Control for Health and
Safety Act of 1968. This means that the printer does not produce haz-
ardous laser radiation.
Since radiation emitted inside the printer is completely confined within
protective housings and external covers, the laser beam cannot
escape from the machine during any phase of user operation.
Warranty Considerations
Various factors can affect a printer’s warranty. Two important ones are
consumables and electrostatic discharge. Read your printer warranty
carefully, and then store it in a safe place.
» Note: Don't return any merchandise to the manufacturer without
calling for a return merchandise authorization (RMA) number.
Consumables and Your Printer Warranty
The use of non-QMS consumables and/or accessories alone does
not affect either your warranty or any maintenance contract you may
have purchased. However, if QMS printer failure or damage is found
to be directly attributable to the use of non-QMS consumables and/or
accessories, QMS will not repair the printer free of charge. In this
case, standard time and material charges will be applied to service
your printer for that particular failure or damage. QMS recommends
that you use only QMS consumables and accessories to support your
printer. To order QMS consumables and accessories in the US, call