Qlogic SANsurfer FC/CNA HBA CLI, User Manual, Page: 314 / 348

D–Help Commands
D-2 SN0054614-00 K
<target wwpn>
World wide port name of a target device.
(
xx-xx-xx-xx-xx-xx-xx-xx
or
xxxxxxxxxxxxxx
).
<vport hex>
World wide port name of the virtual port with the two hexadeci-
mal digits in byte three supplied by the user.
<vport wwpn>
World wide port name of a virtual port.
Table D-2. Help Commands
Command
Line Action
Arguments Function
— [ int ]
Starts interactive mode.
–a ( <hba instance> | <hba wwpn> )
Flashes the adapter port LED to locate it in
the host. This feature is not supported on
QLA22
xx series adapters.
–a ( <hba instance> | <hba wwpn> )
( view | ?)
Shows the current LED state on an adapter
port.
–b ( <all> | <hba instance> | <hba
wwpn> ) [ ( <–rg> <fw | boot|
all> ) ] <file name>
Updates the adapter boot code from a file,
where:
„
<–rg>
Specifies Option ROM region
update mode.
„
<all>
Updates the flash from a full
image file (1MB image file).
„
<file name>
Flash image file name.
Note: Region update is not available on
2Gb adapters. Flash update is not sup-
ported on 2Gb adapters in Macintosh. If
selected multiple adapters, only adapters
that are compatible with the provided flash
image will be updated.
–b ( <hba instance> | <hba wwpn> )
save <file name>
Saves the adapter boot code to a file.
–c ( <hba instance> | <hba wwpn> )
Views the adapter parameters settings of
an adapter port.
–c [ <all> ]
Views the adapter parameters settings of
all adapters.
Table D-1. Variables Used in Arguments (Continued)
Variable Description