Qlogic SANsurfer FC/CNA HBA CLI, User Manual, Page: 183 / 348

4–Non-Interactive Commands
Command Summary
SN0054614-00 K 4-9
The
-cna
command line options use the following variables:
To view general information for the adapter, issue the following command:
scli -cna < hba instance >|< hba wwpn > --geninfo
To view data center bridging exchange protocol (DCBX) settings, issue the
following command:
scli -cna < hba instance >|< hba wwpn > --dcb --info
To update the message passing interface (MPI) configuration table on the adapter
from a file, issue the following command:
scli -cna <hba instance>|< hba wwpn > --updatecfg < mpi file >
To save the current MPI configuration table of the selected adapter to a file, issue
the following command:
scli -cna < hba instance >|< hba wwpn > --savecfg < mpi file >
To view DCBX Type-Length-Value (TLV) data sent and received over the adapter
port connection, issue the following command:
scli -cna < hba instance >|< hba wwpn > --tlv --detail | --raw
To view data center Ethernet (DCE™) network activity information sent and
received over the adapter port connection, issue the following command:
scli -cna < hba instance >|< hba wwpn > --mon --dce [ { < param
name > | < param alias > < param value > } ]
Table 4-3 lists the DCE statistics parameters, possible values, and a description
of each.
hba instance = Adapter instance number of a converged network adapter port
hba wwpn = World wide port name of a converged network adapter port
mpi file = MPI configuration
.dat
file
--detail = View detailed format
--raw = View raw format
param name = Parameter name
param alias = Parameter alias
param value = Parameter value