Qlogic SANsurfer FC/CNA HBA CLI, User Manual, Page: 267 / 348

B–XML Format 2
XML Format 2 Tags for Each Option
SN0054614-00 K B-11
</HBA>
<Status> n </Status>
<?ErrorMsg> "message" </ErrorMsg?>
<Reboot> n /Reboot>
</QLogic>
The
<HBA>
…<
/HBA>
sequence repeats for each adapter.
Diagnostics Results—Loopback Test
(Command Line Option -kl)
The command format is:
scli -kl (< hba instance > | < hba wwpn >) [(< param name > | < param
alias >) < param value >] -x2
The XML Format 2 for the loopback test results is as follows:
<?xml version="value" encoding="value"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.n.nn Build nn</AppVersion
<AppXmlVersion>n.nn</AppXmlVersion>
<HBA>
<HBA Instance="value" HBAModel="value" HBAPort="value"
WWNN="value" WWPN="value" />
<Loop ID="value"
CRCError="value"
DisparityError="value"
FrameLengthError="value"
Result="Success"/>
</HBA>
NOTE:
If
EnableSelectableBoot
is set to 1 in the
BootParam
EnableSelectable Boot
tag, it does not appear in the
BootDevice
TargetWWPN
tag:
<BootParam EnableSelectableBoot="1" />
<BootDevice TargetWWPN="value" LUNID="value"
However, if
EnableSelectableBoot
is set to 0 in the
BootParam
EnableSelectableBoot
tag, it appears in the
BootDevice
TargetWWPN
tag:
<BootParam EnableSelectableBoot="0" />
<BootDevice TargetWWPN="value" LUNID="value"
EnableSelectableBoot ="0"/>