Qlogic SANsurfer FC/CNA HBA CLI, User Manual, Page: 192 / 348

4–Non-Interactive Commands
Command Summary
4-18 SN0054614-00 K
-g
(Display System Information)
To view system information, type:
# scli -g
For details of this command, see “Display System Information (Command Line
Options -g, -z, and -tp)” on page 4-1 .
-gs
(Show HBA Statistics)
To view the adapter statistics, type:
# scli -gs
(
< hba instance > | < hba wwpn >) [(< param name > |
< param alias >) < param value >]
Where:
Table 4-6 lists the adapter statistics parameter names, aliases, and values.
Under Solaris, this feature is disabled if you are using the driver from the OS
installation CDs (QLC driver). Under Linux, this feature is disabled if you are using
the IOCTL or sysfs (inbox) driver.
hba instance = Adapter number (use
-g
command to find)
hba wwpn = World wide port name of the adapter
param name = Name of the parameter (see table 4-7)
param alias = Alias of the parameter (see table 4-7)
param value = New value of the parameter (see table 4-7)
Table 4-6. Adapter Statistics Parameters
Description Name Alias Value
Sets how often statistics are retrieved
AutoPoll AP 0–256
a
a
When the AutoPoll value is 0, statistics are retrieved automatically until the user aborts the
operation.
When the AutoPoll value is in the range of 1–256, statistics are retrieved for the number of cycles
specified by this value.
Set the polling interval when retrieving statis-
tics (seconds)
PollRate SR
5–30
Saves the adapter’s statistics to a CVS log file
LogToFile LF
Log file
name
Table Notes