4–Data Migration Licenses
Viewing Data Migration License Usage
4-8
ISR654606-00 A
The following example shows the
set array
command.
MPX200 (miguser) #>
set array
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index WWPN, PortId Symbolic Name Target Type
-----
---------------------------------
---------------
-----------
0
50:00:1f:e1:50:0a:e1:4c, 01-2b-00
HP HSV200-0
Unknown
1
50:00:1f:e1:50:0a:37:18, 01-24-00
HP HSV210-1
Unknown
2
50:06:01:69:41:e0:18:94, 01-2d-00
DGC RAID-2
Unknown
3
20:70:00:c0:ff:d5:9a:05, 01-0f-ef
HP MSA2012fc-3
Unknown
Please select a Target Id from the list above ('q' to quit): 1
Symbolic Name (Max = 128 characters) [HP HSV210-1]
Target Type (1=SrcTarget, 2=DstTarget, 3=Src+Dest Target) [3 ]
1
Bandwidth for Migration (0=Array Bandwidth, 1-400 MBps ) [0 ]
Do you want to apply array license (yes/no) [No ]
yes
All attribute values for that have been changed will now be saved.
Viewing Data Migration License Usage
You can view the usage for the data migration licenses from either the HP
StorageWorks mpx Manager GUI or the CLI. This section provides both methods.
Viewing Data Migration License Usage in the GUI
Follow this procedure to view the usage of data migration licenses in the GUI.
To view data migration license usage in the GUI:
1.
In the left pane of the HP StorageWorks mpx Manager, click the
Services
tab.
2.
In the left pane, click
mpx MPX200:<
IP address
>
.
License usage appears on the Data Migration Info page, as shown in
Figure 4-6
.