ISR654606-00 A
3-1
3
Using DMS
This chapter provides the following procedures for using DMS:
General Steps for Data Migration
“Setting Array Properties” on page 3-2
“Creating a Data Migration Job Group” on page 3-6
“Using the Data Migration Wizard” on page 3-7
“Starting Serial Scheduled Jobs” on page 3-18
“Viewing the Status of Data Migration Jobs” on page 3-19
“Rescanning Targets” on page 3-22
“Viewing Job Details and Controlling Job Actions” on page 3-23
“Viewing System and Data Migration Job Logs” on page 3-27
“Using the Verify Migration Job Wizard” on page 3-32
“Acknowledging a Data Migration Job” on page 3-36
“Removing an Offline Array” on page 3-36
General Steps for Data Migration
To perform data migration, follow these general steps:
1.
Plan for data migration. For project guidelines, refer to the
Data Migration
Service for HP StorageWorks MX200 Planning Guide
.
2.
Zone the Fibre Channel ports from the HP StorageWorks MPX200
Multifunction Router with the Fibre Channel ports of the storage array.
3.
Present the source LUNs and destination LUNs to the MPX200 using the
array vendor’s configuration tools; for example, use Command View for HP
Enterprise Storage Array (EVA) or Navisphere
®
for EMC CLARiiON.
4.
Before beginning data migration, clear the migration logs (see
“Viewing
System and Data Migration Job Logs” on page 3-27
).
5.
If the router fails to discover arrays, use the target rescan option (see
“Rescanning Targets” on page 3-22
).
