2–Getting Started
Supported Configurations
2-2
ISR654606-00 A
Fabric Configuration
Figure 2-2
shows typical setup for data migration with a dual fabric high
availability (HA) configuration with both array controller ports and one port from
each MPX200 blade connected to each fabric. This configuration enables the
MPX200 to perform load balancing.
Figure 2-2 Single and Dual Blade High Availability Setup
Table 2-1
shows the migration rates that can be achieved for a single blade,
depending on the bandwidth capability of the storage array.
Table 2-1. Migration Rates for Single and Dual Blade Configurations
Array Type
Single Blade
Dual Blade
2Gb Fibre Channel
700 GB/hour
1 TB/hour
4Gb Fibre Channel
1.25 TB/hour
2.5 TB/hour
8Gb Fibre Channel
2 TB/hour
4 TB/hour
Single
Blade
Dual
Blade
