Qlogic 3000 Series, Reference Manual

Page: 35 / 98

1–Switch Management Classes
QLGC_RemoteServiceAccessPoint : CIM_RemoteServiceAccessPoint
59223-03 E 1-23
AccessInfo
Property will contain the a string value using standard URI syntax,
except for the ethernet interface which is simply the ipaddr.
ServiceType and Value

snmp: snmp://<communityname@<ipaddr> for
SNMPv1 & SNMPv2

snmp://<ipaddr> for SNMPv3

telnet: telnet://<ipaddr>

ssh: ssh://<ipaddr>

EmbeddedGUI: http://<ipaddr>

ethernet: <ipaddr>
Where:

ipaddr = Only the preferred IPv4 and IPv6 address for
each service will be returned for each service type. IPv4
addresses will be in dot-decimal notation. IPv6
addresses will be in IPv6 text notation (rfc2373),
however if it is part of a URL, it will be enclosed in
square brackets (rfc2732).

Communityname = The SNMPv2 community name
string used to authenticate the client.
ElementName
Property will contain the string value “Access Point”
InfoFormat
Property will contain an enumerated value describing the format of the
AccessInfo property.
ServiceType and Value:

snmp: 200-URL

telnet: 200-URL

ssh: 200-URL

EmbeddedGUI: 200-URL

ethernet: 3-IPv4 Address or 4-IPv6 Address
Supported WBEM Operations

getClass

getInstance

enumerateInstances

enumerateInstanceNames

invokeMethod