Qlogic 3000 Series, Reference Manual

Page: 34 / 98

1–Switch Management Classes
QLGC_RemoteServiceAccessPoint : CIM_RemoteServiceAccessPoint
1-22 59223-03 E
Associations

QLGC_LogicalIOBladeFCPort : CIM_ModulePort — 1toMany
relationship to QLGC_FCPort

QLGC_RealizesLogicalIOBlade : CIM_Realizes — 1to1 relationship to
QLGC_PhysicalIOBlade

QLGC_FCSwitchLogicalIOBlade : CIM_SystemDevice — 1to1
relationship to the local QLGC_FCSwitch instance.
QLGC_RemoteServiceAccessPoint :
CIM_RemoteServiceAccessPoint
RemoteServiceAccessPoint is used by the access points sub-profile to expose
connectivity information for services and interfaces on the switch. There may be
as many as 10 instances of RemoteServiceAccessPoint depending on which
services are enabled on the switch.
Supported Properties and Methods
CreationClassName
Property will contain the string “QLGC_RemoteServiceAccessPoint”
Name
Property will contain a fixed string based on the type of service and
protocol.

_ServiceType Name Value_

snmp “SNMP Interface”

snmp “IPV6 SNMP Interface”

telnet “Telnet Interface”

telnet “IPV6 Telnet Interface”

ssh “SSH Interface”

ssh “IPV6 SSH Interface”

EmbeddedGUI “Web User Interface”

EmbeddedGUI “IPV6 Web User Interface”

ethernet “Ethernet Port IP Address”

ethernet “IPV6 Ethernet Port IP Address”
SystemCreationClassName
Property will contain the string “QLGC_FCSwitch”
SystemName
Property will contain the switch WWN