Qlogic 3000 Series, Reference Manual

Page: 28 / 98

1–Switch Management Classes
QLGC_FCSwitchCapabilities : CIM_EnabledLogicalElementCapabilities
1-16 59223-03 E
QLGC_FCSwitchCapabilities :
CIM_EnabledLogicalElementCapabilities
There will be one instance of FCSwitchCapapilities representing the configuration
capabilities of the switch hosting the CIMAgent. Switch capabilities may change
over time as a result of hardware or license, or operating mode changes.
Supported Properties and Methods
InstanceID
Opaque Identifier
ElementName
Property will contain the string “FC Switch Capabilities”
ElementNameEditSupported
Property will contain a boolean value that will be TRUE if the
FCSwitch.ElementName property may be modified, or FALSE if the
property is read-only.
MaxElementNameLen
Property will contain the maximum string length of the
FCSwitch.ElementName property.
RequestedStatesSupported
Property will contain an array of acceptable values for the
FCPort.RequestStateChange method.
Possible values are:

2-Enabled: All ports are online.

3-Disabled: All ports are offline

7-Test: All ports are in diagnostics mode.

11-Reset: Reset the Switch
DomainIDConfigureable
Property will contain a boolean value that will be TRUE then the
CIM_FCSwitchSettings.PreferredDomainID property may be edited, or
FALSE if the property is read-only.
MinDomainID
Property will contain the minimum DomainID value supported by the
switch. The CIM_FCSwitchSettings.PreferredDomainID may not be
less than this value.
MaxDomainID
Property will contain the maximum DomainID value (254) supported by
the switch. The CIM_FCSwitchSettings.PreferredDomainID may not
be greater than this value.