Qlogic 3000 Series, Reference Manual

Page: 33 / 98

1–Switch Management Classes
QLGC_LogicalIOBlade : CIM_LogicalIOBlade
59223-03 E 1-21
Parameters:

RequestedState [required] Parameter must be one of
the following enumerated values.

2-Enabled: Blade is online.

3-Disabled: Blade is offline

7-Test: Blade is in diagnostics mode.

11-Reset: Blade will be reset.

32768-PoweredOff: Blade will be powered off,
and the CIMAgent will no longer report the blade
object until is it powered on again (or
re-inserted).

Job Ignored, command is synchronous.

TimeoutPeriod, must be zero second interval, or NULL,
command is synchronous.
Method Returns:

0 - Success

6 - In Use: Switch is being configured by another user.

4097 - Invalid State: Transition

RequestedState: parameter value is out of range, or
currently not supported by the blade.

4098 – Use of Timeout Parameter Not Supported
Request Status Codes:

CIM_ERR_ACCESS_DENIED: User does not have
authorization for this command.

CIM_ERR_INVALID_PARAMETER: One or more
required parameters are missing.

CIM_ERR_NOT_FOUND: The LogicalModule instance
was not found.
Supported WBEM Operations

getClass

getInstance

enumerateInstances

enumerateInstanceNames