background image

29

Press 

11 

 key to enter function menu.

Turn  the  Main  band  selector  knob  to 

21 

choose No. 48 menu. The LCD displays "

dIMMER

"

Press the Main band selector knob to enter function setup.

31 

Switch the Main band selector knob to choose wanted value.

41 

Available value: 32 brightness levels.

Press  the  Main  band  selector  knob  or 

51 

  key  to  store  value  and  back  to 

function menu. Press 

 key or hold 

selector knob for over 0.5 second to store setup and exit.

keYpAd bAckliGht bRiGhtneSS

The transceiver offers enquiry of calling record.

Press 

11 

 key to enter function menu.

Turn  the  Main  band  selector  knob  to 

21 

choose No. 49 menu. The LCD displays "

NOTE

"

Press the Main band selector knob to enter function setup.

31 

Switch the Main band selector knob to choose wanted value.

41 

This transceiver able to record 16 calling at most.
Press the Main band selector knob or 

51 

 

key to store value and back to function 
menu. Press 

 key or hold selector 

knob for over 0.5 second to store setup and exit.

cAllinG RecoRd

Press 

11 

 key to enter function menu.

 Turn  the  Main  band  selector  knob  to 

21 

choose No. 50 menu. The LCD displays "

AM

"

AM Function

This function is only valid when the Main band frequency is VHF 118-

174MHz, the function is invalid when the right band is set as Main band.

NOTE

AutoMAtic AM Function

To enable Automatic AM function, the AM function shall be turned on first.

The radio will automatically boot AM function when the VHF frequency 

is under 136Mhz

 Press 

11 

 key to enter function menu.

Turn  the  Main  band  selector  knob  to 

21 

choose No. 51 menu. The LCD displays "

AUT AM

"

Press the Main band selector knob to enter function setup.

31 

Switch the Main band selector knob to choose wanted value.

41 

ON

: turn on auto AM function.

OFF

: turn off auto AM function.

Press the Main band selector knob or 

51 

 key to store value and 

back to function menu. Press 

 key or hold selector knob for over 

0.5 second to store setup and exit.

NOTE

7

General Setting

Press the Main band selector knob to enter function setup.

31 

Switch the Main band selector knob to choose wanted value.

41 

ON

: turn on AM function.

OFF

: turn off AM function.

Press the Main band selector knob or 

51 

 key to store value and 

back to function menu. Press 

 key or hold selector knob for over 

0.5 second to store setup and exit.

Summary of Contents for T4K-5888UV














































Reviews: