16
5888UV
General Setting
Once APO is activated, the transceiver will be automatically switched
off when the pre-set timer running out.
Press
11
key to enter function menu.
Turn the Main band selector knob to
21
choose No. 01 menu. the LCD displays "
APO
"
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to
41
choose wanted value.Available Values:
0.5-12 hours, OFF
Press the Main band selector knob or
51
key to store value and
back to function menu.
Press
key or hold selector knob for over 0.5 second to store
setup
and exit.
Only in frequency (VFO) mode, this function is valid. Turn selector
knob to to select frequency or frequency scanning which is restricted by
frequency step size.
Press
11
key to enter function menu.
Turn the Main band selector knob to
21
choose No. 03 menu. the LCD displays "
STEP
"
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted value.
41
Available Values: 2.5K, 5K, 6.25K, 10K,
12.K, 15K, 20K, 25K, 30K,50K.
Press the Main band selector knob or
51
key to store value and
back to function menu.
Press
key or hold selector knob for over 0.5 second to store
setup and exit.
This transceiver has automatic offset function. When this function is on,
the transceiver will automatically transmitting with RX frequency ± offset
frequency. The operation as following:
Apo (AutoMAtic poweR oFF)
FRequencY chAnnel Step Setup
AutoMAtic oFFSet
operation steps of Function menu
Press
11
key to enter function menu.
Turn the Main band selector knob to choose wanted function.
21
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted value.
41
Press the Main band selector knob to store value and back to
51
function menu. Press
key or hold selector knob for over 0.5
second to store setup and exit.
Press
11
key to enter function menu.
Turn the Main band selector knob to
21
choose No. 02 menu. the LCD displays
"
ARS
"
Press the Main band selector knob to enter function setup
31
Switch the Main band selector knob to choose wanted value.
41
ON:
Auto Offset function is turned on.
OFF
Auto Offset function is turned off.
Press the Main band selector knob or
51
key to store value and
back to function menu.
Press
key or hold selector knob for over 0.5 second to store
setup and exit.
When the Automatic offset is ON, the offset for 136-174Mhz is default on
0.6Mhz, and for 400-490 is default on 5Mhz.
7
NOTE
Summary of Contents for T4K-5888UV
Page 45: ...A1 0 12 11...
