20
5888UV
7
General Setting
Press
11
key to enter function menu.
Turn the Main band selector knob to
21
choose No 14 menu. The LCD displays "
dTMF S
"
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted value.
41
30MS:
The time for transmit a single DTMF encode and the interval is 30MS,
50MS:
The time for transmit a single DTMF encode and the interval is 50MS,
80MS:
The time for transmit a single DTMF encode and the interval is 80MS,
100MS:
The time for transmit a single DTMF encode and the interval is 100MS,
150MS:
The time for transmit a single DTMF encode and the interval is 150MS,
200MS:
The time for transmit a single DTMF encode and the interval is200MS,
250MS:
The time for transmit a single DTMF encode and the interval is 250MS,
Press the Main band selector knob or
51
key to store value and back to
function menu. Press
key or hold selector knob for over 0.5
second to store setup and exit.
Press
11
to enter function menu
Switch the Main band selector knob to
21
choose No 15 menu, the LCD displays
dTMF W
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose DTMF group. Then
41
press
key back to DTMF menu.
Press PTT will transmit with selected
DTMF code.
06-16:
total 16 group of DTMF code.
dtMF encode tRAnSMittinG tiMe
dtMF encode Setup
When the selected group is empty, the
51
LCD displays '------"
Press the selector knob to enter the DTMF signaling edit. The LCD
61
display "-- -- -- -- -- --", the last character flashes.
Switch the selector knob to choose wanted character. Press the
71
selector knob to confirm selected value and start edit for next
character.
Press
81
key to store value and exit code editing. Press
key
again to store setup and exit. Press
key or hold selector knob
for over 0.5 second to store setup and exit.
This transceiver has 5 squelch modes available. Squelch function is
used for increase the level of filtering unwanted signal, and free from
disturb.
Press
11
key to enter function menu.
Turn the Main band selector knob to
21
choose No 16menu. The LCD displays "
SGN SQL
"
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted value
41
SQ:
You can hear the calling once receives matching carrier.
CTSS/dCS:
You can hear the calling when receives matching carrier
and CTCSS/DCS code.
CT*TO:
You can hear the calling when receives matching c
optional signaling.
TONE:
You can hear the calling when
receives matching carrier + CTCSS/DCS + optional
signaling.
CT/TO:
You can hear the calling when receives any matching carrier
or CTCSS/DCS or optional signaling.
Squelch Mode Setup
7
Summary of Contents for T4K-5888UV
Page 45: ...A1 0 12 11...
