24
5888UV
General Setting
To avoid the receiving of sub band disturbing the communication of the
main band, you can turn on this function. The RX of the sub band will be
mute during the RX or TX of the main band.
Press
11
key to enter function menu.
Turn the Main band selector knob to
21
choose No 25 menu. The LCD displays "
MUTE
"
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted value.
41
TX:
When the Main band is transmitting, the sub band receiving will
be mute.
RX:
When the Main band is receiving, the
sub band receiving will be mute.
RX/TX:
the sub band receiving always mute.
Press the Main band selector knob or
51
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
Sub bAnd Mute Setup
editinG chAnnel nAMe
7
After edit a name for a channel, if the display mode is channel name,
the will displays the name edited in this menu. Otherwise it will display the
frequency.
Press
11
key to enter function menu.
Switch the selector knob to choose NO 26
21
function menu, the LCD displays "
NAME C
".
Press the Main band selector knob to enter function setup.
31
Switch the selector knob to choose
41
wanted character.
Press the selector knob to confirm current character and start edit
51
next character, after editing all 7 characters, press the selector knob
to edit and back to function menu.
If the editing not reach 7 characters, press
61
key back to function
menu, then press
key or hold selector knob for over 0.5 second
to store setup and exit.
chAnnel Function Auto StoReAGe Setup
When this function is on, all channel operation in channel mode will
be stored until next change, otherwise, when change channel or repower
on radio, all the channel operation will be resumed to pre-store state
Press
11
to enter function menu
Turn the Main band selector knob to choose NO27 menu, The
21
LCD displays "HYPER"
Press the Main band selector knob to
31
enter function setup.
Switch the Mian band selector knob to choose wanted value.
41
MANUAL:
Auto storeage is turn off.
AUTO:
Auto storeage is turn on.
Switch the Main band selector knob to choose wanted value.
41
ON:
Talk Around is turn on, The TX and RX frequency will be
exchanged, the CTCSS DCS signaling also will be exchanged if
existed in current channel.
OFF:
Turn off Talk Around
Press the Main band selector knob or
51
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
Summary of Contents for T4K-5888UV
Page 45: ...A1 0 12 11...
