Qimarox PRORUNNER Mk5, User Manual

Page: 90 / 202

Maintenance belt conveyor
90 UM-PRORUNNER_Mk5-1.2-EN-US
9.2 Preventive maintenance schedule, belt carrier
9.2.1 Daily maintenance
/i
9.2.2 Weekly maintenance
/i
Item Task Action when required by the
check
Guards and covers Check for visible damage. Replace damaged guards and /
or covers.
Check if the mounting materials
are present and have been cor-
rectly placed. Place the mounting materials or
correct the way in which they
have been fastened.
Entire machine Check for visible dirt. Clean the machine. Refer to
section
9.3 .
Item Task Action when required by the
check
Conveyor belt Check for visible damage to the
surface and sides. Replace the conveyor belt.
Refer to section
9.7 .
Clean. Refer to section 9.3 .
Driving drum Check for damage of the run-
ning surface and bearings. Replace the driving drum. Refer
to section
9.7 .
Clean. Refer to section 9.3 .
Check for running sounds. Lubricate the bearings in the
driving drum. Refer to section
9.4.1 .
Timing belt Check for damage. Replace the timing belt Refer to
section
9.7 .
Check the alignment. Align the pulleys. Refer to sec-
tion
9.7 .
Clean. Refer to section 9.3 .
Pulley Check for dirt. Clean. Refer to section 9.3 .
Check for visible deformation. Replace the pulley. Refer to
section
9.7 .
Make sure the is running freely
and smoothly. Replace the pulley. Refer to
section
9.7 .
Check the alignment. Align the pulleys. Refer to sec-
tion
9.7 .