Qimarox PRORUNNER Mk5, User Manual

Page: 104 / 202

Maintenance driven roller conveyor
104 UM-PRORUNNER_Mk5-1.2-EN-US
12.2 Preventive maintenance schedule, driven roller carriers
12.2.1 Weekly maintenance during the first 8 weeks after putting into
operation
/i
12.2.2 Daily maintenance
/i
12.2.3 Weekly maintenance
/i
Item Task Action when required by the
check
Conveyor belt Tighten the conveyor belt. Refer to section 12.9 .
Item Task Action when required by the
check
Guards and covers Check for visible damage. Replace damaged guards and /
or covers.
Check if the mounting materials
are present and have been cor-
rectly placed. Place the mounting materials or
correct the way in which they
have been fastened.
Entire machine Check for visible dirt. Clean the machine. Refer to
section
12.3 .
Item Task Action when required by the
check
Drive belt Check for visible damage to the
surface and sides. Replace the belt. Refer to sec-
tion
12.10 .
Clean. Refer to section 12.3 .
Drive pulley Check for damage of the run-
ning surface and bearings. Replace the drive pulley. Refer
to section
12.10 .
Clean. Refer to section 12.3 .
Check for running sounds. Lubricate the drive pulley bear-
ings. Refer to section
12.4.1 .
Return wheels Check for damage. Replace the return wheel. Refer
to section
12.10 .
Check if the fastening bolt on
the carrying shaft is present
and has been correctly fixed. Replace the return wheel. Refer
to section
12.10 .
Clean. Refer to section 12.3 .
Pressure roller Check for dirt. Clean. Refer to section 12.3 .
Check for visible deformation. Replace the pressure roller.
Refer to section
12.10 .
Make sure the rollers run freely
and smoothly. Replace the pressure roller.
Refer to section
12.10 .