QIAamplifier 96 User Manual 03/2020
63
8.8
Deleting a step
To delete a step, select a program step on the QIAamplifier 96 spreadsheet or graphical
programming screen and press
Delete
.
Delete
Note
: If a step is deleted, all the following steps will be moved one position lower. If, for example,
step 3 is deleted, step 4 will become step 3, step 5 will become step 4 and so on.
Note
: If a step is deleted in an existing loop, the number of steps within the loop decreases, whereas
the number of cycles remains the same.
8.9
Saving the program
To save a program, press
Done
.
Done
on the QIAamplifier 96 spreadsheet or graphical programming screen. In the next program
overview screen (see Figure 29), touch the corresponding buttons to select a user directory and a
program storage location.
If the number of user directories or programs is higher than the maximum number that can be
displayed in the list, the buttons above and below the list can be used to scroll up and down.
Note
: The user directory of the logged in user is automatically preselected.
Note
: If a new program is to be saved, the first free storage location in the directory of the currently
logged in user is automatically selected. However, the storage location can be changed using the
cursor keys above and below the lists. If the selected storage location is already in use, the stored
program will not be overwritten; instead this program and all other following programs will be
moved one position higher. The storage location number for these programs will increase by +1
and the new program is saved at the selected location.
