QIAamplifier 96 User Manual 03/2020
59
8.6.2
Direct programming of program parameters for a step
The QIAamplifier 96 software allows individual parameters (temperature, hold time, loops,
temperature, and time increment, as well as the ramp rate) for a step to be edited directly in the
graphical or spreadsheet view.
To edit a parameter for a step, press directly on the cell for the program parameter in the table (see
Figure 25).
Figure 24. QIAamplifier 96 spreadsheet program view.
Parameter
Spreadsheet view
Temperature (gradient) °C
①
Hold time h:mm:ss
②
Loops
③
Number of cycles
④
Temperature increment ∆T (°C)
⑤
Time increment ∆t (s)
⑥
Ramp rate ∆R (°C/s)
⑦
To edit program parameters in the graphical view, press the corresponding input field for the
parameter that you want to edit for the step (see Figure 26).
