Page 18 of 24
FLUO SENS integrated Manual
January 2013
Special
:
Modbus address 255 is the broadcast address, the device doesn't
send a response to this request.
Remark:
For byte parameters in bytes 0 or 2 (like Modbus Adress...) the given
values written to the detector must be multiplied by 256.
Example:
Set Modbus Address to 2 you have to write 2 * 256 = 512 to the
detector word address 164.
Registers 400 to 511 are general purpose registers for storage of any
user data (available in firmware version 1.46, dated 19.12.2011 and
higher).
Summary of Contents for FLUO SENS
Page 1: ......
Page 2: ...Manual...
