Qiagen DML 3000, User Manual

Page: 39 / 81

Installation
DML 3000 User Manual 5-1
5 Installation
The installation of the DML 3000 must adhere to the space and positioning
requirements in the following table.
Requirement Specification
Space for the instrument, including the
HC2 System PC, keyboard, and printer
Approximately 153 cm (60 in) wide,
64 cm (2 in) deep, and 64 cm (25 in)
high
Clearance behind the DML 3000
required to allow for adequate heat
dissipation and accessibility to the
power button.
A minimum of 20 cm (8 in) clearance.
Place the DML 3000 so that the power
cord can be easily unplugged from the
rear panel.
Weight on top of DML 3000 No weight is allowed on top of the
DML 3000.
Place the instrument on a firmly secured benchtop. Locate it away from other
vibration-sensitive instruments, such as an analytical balance.
Place the instrument on a level, stable surface near a grounded electrical outlet. Allow
at least 7.5 cm (3 in.) of clearance on all sides of the instrument for proper ventilation.
While operating, make sure that the DML 3000 platform does not touch other
objects.
For power requirements and technical data, see “Appendix A,” page A-1
The DML 3000 type plate is located on the right side of the back panel next to the
power switch. The type plate contains the DML 3000 serial number which is required
to set up the DML 3000 in the digene HC2 System Software.
5.1 Connecting the components
Locate the following components:
Power adapter
Power cord
RS-232 cable
Plug the power adapter into the power connection port.