EZ2 Connect MDx User Manual 05/2022
109
5.4.5
Loading the cartridge rack
Remove the cartridge rack from the instrument and place it safely onto the bench. See the Loading
and unloading the cartridge rack section (page 130).
steps (page 130) features instructions on how to load the cartridge
rack. To highlight the well on the diagram and the corresponding row in the table, tap the well or
the table row. In the IVD mode of the software, only the protocols for the DSP Virus Kit use the
loading instruction for the additional well in the table.
Important
: Read the instructions carefully before loading the rack, and make sure to follow all
directions including those in the respective kit handbook.
Figure 102. Load the cartridge rack step.
To proceed to the
Load the tip rack
step, tap
Next
.
To return to the previous screen, tap
Back
.
To cancel the protocol, tap
Cancel
.
