E n g l i s h
|
8
Qfix
|
440 Church Road
|
Avondale, Pennsylvania 19311 USA
|
+1 610-268-0585
|
+1 610-268-0588
|
www.Qfix.com
|
2007856_C
VI. CABLE CONNECTION
Proceed as follows to connect the power supply wire to the terminal board:
•
(A1) Loosen the tops of the cable gland. Open the lower part of the back of the oven by loosening
the screws.
•
(A2) Feed the new cable through the cable gland. Connect the cable voltage to the terminal strips
following the connection diagram on the label on the back of the oven. Only connect what is
indicated by inserting the copper bridge and the electricity cable together under the screws, in
the tightening direction, so that the cable and the bridge are tightly fixed by tightening the screw.
•
(A4) Close the lower part of the back of the oven by tightening the screws. Fit the cable by
tightening the cable gland top.
Erroneous connection may lead to overheating of the terminal board leading to blowout and electric
shock.
Check that all the connections are tight before connecting the oven to the power outlet.
PE = Yellow/Green: “GROUND” protection conductor.
N = Blue: neutral conductor.
L1, L2, L3 = Brown, Grey, Black: live conductors
Verify that there is no static discharge between live and ground. Check the limit switch continuity
between the external casing and the ground wire of the power outlet. Use a multi-tester to conduct
these operations is recommended.
