E n g l i s h
|
13
Qfix
|
440 Church Road
|
Avondale, Pennsylvania 19311 USA
|
+1 610-268-0585
|
+1 610-268-0588
|
www.Qfix.com
|
2007856_C
II. USING THE OVEN FOR THE FIRST TIME
Verify installation has been performed correctly per instructions indicated in this manual and per local
laws and regulations. Verify all Warnings and Safety Instructions are understood and are carefully
followed prior to operating the oven.
Ensure there are no plastic materials, manuals, or plastic film contained inside or outside of the
oven.
All packaging should have been removed, including the protective film applied on the walls of
the oven.
The vents and aeration slits should be open and clear of obstructions.
Verify any parts of the oven dismounted during the installation process have been mounted back into
position.
TESTING
Prior to first usage, test the oven by completing a sample heating cycle. The sample heating cycle
verifies functional operation and indicates the presence of failures.
The sample heating cycle must
include the oven racks in position inside the oven.
1.
Start the oven by pressing the ON/OFF button.
2.
Wait until the Program Indicator (P01) stops flashing.
3.
Press the INCREASE button to set the temperature at the highest setting.
4.
Press the TIMER button followed by the INCREASE/DECREASE buttons to set the heating time to
15 – 20 minutes.
5.
Press the START/STOP button.
6.
Preheating will begin and “PrH” will blink on the display.
7.
At the end of the preheat cycle, the oven will display PrH READY.
8.
Press START/STOP to clear the PrH READY display.
9.
Press START/STOP to activate the timer and begin the count down.
The oven racks are coated with an oil residue during the manufacturing process. During the 15 – 20-
minute test-heating cycle, the residue will “burn off”. Minor smoking may be observed during the
“burn off” period.
During the heating cycle, thoroughly verify the conditions listed below:
•
Press the LAMP button. The heating chamber light is on. After 60 seconds the heating chamber
light shuts off.
•
When the oven door is opened, the timer pauses. The timer resumes when the oven door is closed.
•
When the oven door is opened, the oven stops heating and the motor and fans stop. When the
oven door is shut, the oven, motor, and fans resume operation.
