E n g l i s h
|
14
Qfix
|
440 Church Road
|
Avondale, Pennsylvania 19311 USA
|
+1 610-268-0585
|
+1 610-268-0588
|
www.Qfix.com
|
2007856_C
•
At the set temperature, the heating temperature thermostat turns off the heating elements.
•
The heating chamber fans spin in the same direction.
III.
MAINTENANCE
The user is solely responsible for daily maintenance.
CLEANING: GENERAL RULES
Before cleaning, disconnect electrical power from the oven and ensure the oven is completely cool.
WARNING: the oven should never be cleaned with high pressure water sprays.
Appropriate eye, mouth, and hand protection should be used.
The oven should be thoroughly rinsed using a damp cloth. Never leave residue of solvents or
detergents in the oven. Possible danger of corrosion may occur if residues are not thoroughly
removed.
CLEANING OF HEATING CHAMBER
Regular cleaning will maintain a sanitary heating chamber and will prevent deterioration of the steel
components.
Follow your center’s cleaning protocols.
Clean the walls of the heating chamber using soap and hot water and rinse well. Regular cleaning of
the oven heating chamber lining must be conducted with a non-abrasive detergent. Do not use high
pressure water steam lances or steamers for cleaning. Acidic, abrasive, corrosive sand-based or caustic
soda based detergents are prohibited.
It is strictly prohibited to wash the heating chamber in heating temperatures higher than 70°C (158°F),
as it presents a scalding danger.
Use plastic bristles or a sponge soaked in vinegar and warm water to clean dirt crusts.
Only use products recommended by Qfix.
EXTERNAL CLEANING
Use a damp cloth with warm water or products suitable for cleaning stainless steel. Do not use acidic
products or ammonia.
