Qeedji 4.13.15 002E, User Manual

Page: 22 / 65

22
3.1 Administration console user interface
The DMB 400 device has a Web user interface that can be accessed with a Web browser. The supported Web browsers are:
Google Chrome
,
Mozilla
Firefox
,
MS-Edge
and
MS-Edge (Chromium)
.
It is accessible from the URL:
http://<device_ IP_ addr>/
.
B y default, the login credentials for the device Web user interface are:
login:
admin
,
password:
admin
.
The URL falls automatically into the applicative user interface¹ . At the top right corner, click on the
Administration Console
button.
¹ F or further information, refer to the chapter § Applicative user interface .
With the button at the top right corner
1
, choose the language in which your device Web user interface needs to be displayed. The supported
languages are:
English ,
Spanish ,
German ,
F rench .
◬
It is desirable that your device DMB 400 device is on time. When possible, do synchronize it with an NTP server.
This is the
Administration console
user interface.
◬
After you have changed and saved all your settings in the different panes, be sure to perform a device restart by clicking on the
Reboot the
device 2
button so that your changes are fully reflected.
Click on the device logo
1
at the left top corner to return to the applicative user interface.
◬
If the device does not respond to its IP address, either the device power supply is unplugged, or the Ethernet cable is not connected, or the
network configuration is not properly adjusted. To solve the problem, if your computer and local network supports IPV6, connect an Ethernet
cable on the device and connect to the device Web user interface with its IPV6 address, which can be found on the test pattern displayed on
the screen.
For example, for the MAC address value: ` ` 00-1c-e6-02-1e-45` ,
In a Web browser, enter the URL: http://[ fc00::21c:e6ff:fe02:1e45] /.admin/
To obtain the application note reminding some notions about IPV6 configuration, refer to the appropriate application note on the Qeedji Web
site .
1
2