Qeedji 4.13.15 002E, User Manual

Page: 11 / 65

11
1.2.5 Test card
At the factory, the device content set by default is the
Test Card
. The chart displays important information to assist in the device configuration:
☛ The
*
star pictogram is showing the chosen identifi cation method in the device. It can be
H O STNAME
1
,
UUID
2
or
MAC
3
. In the example,
the star is showing the
MAC
identifi cation method ( default value) .
☛ The

k ey pictogram
4
is showing the MAC address value associated to the Gek k ota license k ey.
☛ The
up
STATE
5
is meaning that the network interface currently showed is alive. If the STATE is
down
, the network interface is not alive.
The
Test Card
can be inactivated by using the
Administration console
user interface.
If the CEC is activated on your screen, and the CEC pass-through feature is fully supported, the test card can be activated or inactivated thanks to the
screen remote control with the key combination [ left, right, left, right] pressed in less than 10 seconds.


1
2
3 4
5