O
7.
Remove the discharge check assembly
from the black wye fitting.
8.
Remove the inlet screen assembly from
the black wye fitting.
9.
Remove the inlet check ball. Clean the
check ball and seat as necessary.
10.
Reassemble the inlet and discharge
check assemblies.
11
. Tip the pump over from top to bottom.
You should hear the float sliding freely
inside the body.
6
Warning:
The top fill inlet assembly (the
wye) is a relatively delicate component in
terms of assembly of the fittings. Over
tightening of the check assembly or other
fittings could result in leaks or even cause
the wye to split at the parting line.
