QDI PlatiniX 8 Series, Manual

Page: 27 / 73

19
Manual for PlatiniX 8 series
Chapter 2
Enable keyboard password power-on function (JKB)
The mainboard provides the advanced keyboard password power-on function. Before
using this function, set JKB with pin1 & pin2 closed. Otherwise, set JKB with pin2 & pin3
closed for disabling.
Furthermore in order to implement this function, set “POWER ON Function” to “Password”
and enter the keyboard power-on password in the “INTEGRATED PERIPHERALS” section
of the CMOS SETUP. Save and exit, then power off your system. In this case, the power
button’s power-on function is disabled.
Note:
1. If using this function, 5VSB line of the power supply should be capable of delivering
enough current for all the devices connected to the keyboard port, if not, you will be
unable to power up the system using the keyboard.
2. If you set JKB with pin2 & pin3 closed, set “POWER ON Function” to BUTTON ONLY,
don’t set it to Password, or you’ll be unable to power up your system by the keyboard
or the power button.
3. If you encounter the above problems, clear CMOS and set the jumper pin2 and pin3
closed to disable the function,them power on the system by pushing
the power button,and set “power on Fuction” back to “Button Only”.
JKB
JKB
1
2
3
1
2
3
Disable
(default)
Enable
P8en.p65 02-4-30, 16:28 19