11
Manual for PlatiniX 8 series
Chapter 2
Wake-Up On Internal Modem (WOM)
Through this function, the system which is in the suspend or soft-off status can be
waked up by a ring signal received from the internal modem. When this function is used,
be sure an internal modem card which supports this function is used. Then connect this
header to the relevant connector on the modem card, set Power on by Ring/LAN as
Enabled in the Power Management Setup section of the CMOS SETUP. Save and exit,
then boot the operating system once to make sure this function takes effect.
Wake-Up On LAN (WOL)
Through the Wake-Up On LAN function, a wake event occurring from the network can
wake up the system. If this function is to be used, please be sure an ATX12V power
supply , and a LAN adapter which supports this function is used. Then connect this
header to the relevant connector on the LAN adapter, set Power on by Ring/LAN as
Enabled in the POWER MANAGEMENT SETUP section of the CMOS SETUP. Save and
exit, then boot the operating system once to make sure this function takes effect.
+5V standby
GND
Signal for waking up
WOM
1
+5V standby
GND
Signal for waking up
WOL
P8en.p65
02-4-30, 16:28
11
