QDI BrillianX 1S/2000, Manual

Page: 49 / 63

Manual BrillianX 1S/2000
SecurityEasy Setup
Figure-10 SecurityEasy Setup Menu
The following describes the options for each item and describes their meaning
Item Current Description
Data Shown
l
Lock Function Select Enable Enables the LOCK function.
Disable The system never enters LOCK mode.
l SecurityEasy Password Enter The SecurityEasy password is the only
option to exit LOCK mode. When you
select this function. The following message
‘ ENTER PASSWORD’ appears at the
center of the screen to assist you in
creating a password. Type the SecurityEasy
Password no more than six characters,
then press <Enter>. The password typed
now will clear any previously entered
password from CMOS memory. You will be
asked to confirm the password. Type the
password again and press <Enter>.
l Keyboard Inactive Timer Disable The system will not enter the LOCK mode
due to the Keyboard Inactive Timer.
1Min~ Set the continuous idle time of the keyboard
1 Hour before the system enters the LOCK mode.
l
Video Blanking Control Enable Video is blank in the LOCK mode.
Disable Video is normal in the LOCK mode.
Note: See also Chapter 3
46
Award BIOS Description