QDI BrillianX 1S/2000, Manual

Page: 36 / 63

Manual BrillianX 1S/2000
SpeedEasy CPU Setup
Figure-3 SpeedEasy CPU Setup
The following indicates the options for each item and describes their meanings .
Item Option Description
l
CPU Model BIOS automatically detects the CPU model,
therefore this item is shown only. It could be
Pentium(R)II or Intel (R) Celeron(TM), depending on
the processor chosen.
l
CPU Speed SpeedEasy CPU frequency should be set according to the CPU
type. For Celeron TM or Pentium

II (66MHz front-
side bus) processors, you can choose from
200MHz (66X3), 233MHz(66X3.5), 266MHz (66x4),
300MHz(66X4.5), or 333MHz (66X5). For
Pentium

II processors with 100MHz front-side
bus, you can select from 300MHz(100X3),
350MHz (100X3.5), 400MHz (100X4),
450MHz(100X4.5), or 500MHz(100X5).
Jumper This item is only for users who understand
Emulation all the CPU parameters, i.e. System Bus Frequency
‘ 100MHz / 66MHz’ and multiplication of Processor
Core Frequency to System Bus frequency “
x2.5,
x3, x3.5, x4, x4.5, x5, x5.5, x6, x6.5, x7,x7.5, x8.” .
Warning:
Do not set CPU frequency higher than its working frequency. If you do, we
will not be responsible for any damages caused.
33
Chapter 4