QDI BrillianX 1S/2000, Manual

Page: 19 / 63

Manual BrillianX 1S/2000
System memory
l
Provides three 168 pin 3.3V unbuffered DIMM sockets.
l
Supports both 66MHz/100MHz SDRAMs with SPD and 66MHz EDO DIMMs.
l
Minimum memory size is 8MB, maximum memory size is 768MB.
l
SDRAM 64 bit data interface with ECC support.
On-board IDE
l
Supports two PCI PIO and Bus Master IDE ports.
l
Two fast IDE interfaces supporting four IDE devices including IDE hard disks and
CD - ROM drives.
l
Supports up to mode 4 timing.
l
Supports “Ultra DMA/33” Synchronous DMA mode transferring up to 33 Mbytes/sec.
l
Integrated 16x32bit buffer for IDE PCI Burst Transfers.
On-board I/O
l
Use Winbond W83977EF super I/O chip.
l
One floppy port supporting up to two 3.5’ ’ or 5.25” floppy drives with
360K/720K/1.2M/1.44M/2.88M format.
l
Two high speed 16550 fast compatible UARTs(COM1/COM2/COM3/COM4
selective) with 16-byte send/receive FIFOs.
l
One enabled parallel port at the I/O address 378H/278H/3BCH with additional
bi-direction I/O capability and multi-mode as SPP/EPP/ECP (IEEE 1284 compliant).
l
Circuit protection provided, preventing damage to the parallel port when a
connected printer is powered up or operates at a higher voltage.
l
Supports LS-120 floppy disk drive.
l
All I/O ports can be enabled/disabled in the BIOS setup.
Advanced features
l
Supports PC99 color-coding connector specification.
l
Provides Trend ChipAwayVirus ® On Guard.
l
Provides on-board PS/2 mouse and PS/2 keyboard ports.
l
Two USB ports supported.
l
Provides infrared interface.
l
Supports W indows 95/98 software power-down.
l
Supports external modem ring power-on.
l
Supports wake-up on LAN and wake-up on internal modem.
l
Supports auto fan off when the system enters suspend mode.
l
On-board LM80 supports system monitoring (monitors system temperature,voltages,
chassis intrusion and fan speed) (manufacturing option).
l
On-board MAXIM1617 monitors the CPU temperature. (manufacturing option)
l
Provides management application such as ManageEasy and LDCM(LANDesk
®
Client
Manager) (manufacturing option).
Introduction
16