Manual for Advance 5/133E
33
l
Boot Up
O n
Keypad is used as number keys.
Numlock Status
Off
Keypad is used as arrow keys.
l
Gate A20
Normal
The A20 signal is controlled by the keyboard controller
Option
or chipset hardware.
Fast
Default setting. The A20 signal is controlled by Port 92
or the chipset specific method.
l
Memory Parity/
Enabled
Enables the Error Checking & Correction if ECC
ECC Check
memory is used.
Disabled
Disables the ECC function.
l
Password Setting
System
The system will not boot and access to BIOS
Setup will be denied if the correct password is
not entered when prompted.
Setup
The system will boot up, but access to BIOS
Setup will be denied if the correct password is not
entered when prompted.
l
IDE Second
Enabled
Enables the second IDE channel.
Channel Control
Disabled
Disables the second IDE channel and releases the
IRQ.
l
OS Select For
Non-OS2
If your operating system is not OS/2, please select
DRAM>64MB
this item.
OS2
If system DRAM is more than 64MB and the operating
system is OS/2, please select this item.
l
HDD S.M.A.R.T
Enabled
Enables S.M.A.R.T hard disk support.
Capability
Disabled
Invalidates this feature.
l
Video BIOS
Enabled
Video BIOS will be copied to RAM. Video Shadow
Shadow
will increase the video speed.
Disabled
Video shadow is disabled.
l
C8000~CBFFF
Enabled
Optional ROM will be copied to RAM by 16K bytes
Shadow:
per unit.
DC000-DFFFF
Shadow:
Disabled
The shadow function is disabled.
l
Delay For HDD
0~15
Sets the pre-delay time for hard disk to be
0~15 (Secs):
accessed by the system.
l
Show Bootup
Disabled
Enables the logo when system boots up.
Logo
Enabled
Logo will not be shown when system boots up.
l
Flash Write Enabled
Does not allow you to upgrade the BIOS.
Protect
Note: Enabling this item can protect the
system BIOS from being attacked by
severe virus such as CIH. Therefore disable
this item only when wanting to flash BIOS,
afterwards set this item as Enabled (de-
fault).
Disabled
Disabling this item allows you to upgrade the BIOS.
Chapter 3
