Manual for Advance 5/133E
Enable keyboard password power-on function (JKB)
The mainboard provides the advanced keyboard password power-on function. When
wanting to use this function, set JKB with pin1& pin2 closed.Otherwise, set JKB with pin2
& pin3 closed for disabling this function.
In order to implement this function, it is necessory to set the keyboard power-on password
in the “INTEGRATED PERIPHERALS” section of the BIOS. For detailed information, see the
explantions of “ INTERGATED PERIPHERALS” of BIOS Part.
Note: 1.If wanting to use this function, 5VSB line of the power supply should be
capable of delivering enough current (eg. 200mA) for all devices
connected to the keyboard port, or you can’t power up the system using
the keyboard.
2.If you set JKB with pin2 & pin3 closed, set “POWER ON Function” to
Button only or Password/Button, don’t set it to Password, or this will
prevent you from powering up your system.
3. If you encounter the above problems, clear CMOS and reset the jumper
and BIOS option.
chapter 2
25
Disable:
Enable:
JKB
JKB
3
2
1
3
2
1
BIOS-ProtectEasy Jumper (JAV)
The BIOS of the mainboard is contained inside the Flash ROM. If the jumper JAV is set as
closed, you will be unable to flash the BIOS to the mainboard. However in this status, the
system BIOS is protected from being attacked by serious virus such as CIH virus.
JAV
JAV
Flash Write Disabled
Flash Write Enabled
